All Grain Kettle/Pot Quality Criteria

homebrewtalk.com forum

As with many posts I’m working to step up to all grain brewing, but I don’t want to have to do this again in a year so I’m trying to figure out the right criteria for selecting a kettle. I really don’t want to think in a year from now, “If only I had known …. before I bought my kettle”.

From what I’ve read here is my starting point
1) Choose stainless steel:

as opposed to aluminum which will pot over time

2) Choose 20G or greater kettle size:

I’d like to be able to do 10G batches if my heart desires. A 20G kettle will allow for high gravity 10G batches, smaller kettles will make things moer challenging. also, this eliminate the frequently suggested keggle idea as this is only a 15.5G kettle.

3) Can live without built in valves for now, but can upgrade late if desired:

I’m brewing without valves with no problems. I know valves will most likley make things easier, but it isn’t a firm requirement. Additionally, and perhaps more importantly its possible to punch/cut/drill holes and add valves at a later time, if/when desired

Open questions
4) Does 1-3 sound right, particularly #3?

I’ve read a lot of forums and such so far to get here, but I’m new to this and from what I’ve learned from doing extracts is that there is a lot to thing about when.

5) Does base thickness matter?

Seems like there are ranges from 1mm to 5mm. With most hovering around 2mm. I’m guessing this is for even heat distribution, but how much is enough

6) Does side thickness matter?

ranges from not specified to 1mm to 2.5mm. Seems like just about anything would work. Any issues with punching holes on a thin one later to add valves?

7) Need to be NSF certified?

Some claim to be, many don’t specify

8) build construction/materl

I’m not too familiar with the things I’ve seen a) aluminum wrapped/sandwhiched in stainless steel, b) 20 gauge stainless steel, c) 18/10 Stainless Steel, d) 18/10 T304 stainless steel, e) 3-Ply Bottom, and many more

9) Anything else?

I’m probably way over thinking this as I’ve seen posts from many happy brewers with pretty much all the pots I’ve taken a look at, but I haven’t been able to find any criteria for choose a kettle other than size recommendations. thanks for any feedback.

All Grain Kettle/Pot Quality Criteria

Reply

Your email address will not be published. Required fields are marked *